| Specification |
| Specification
|
RT-SJOW3, RT-SJOW4
|
| Diameter
|
30"~40"
|
| Feeder
|
3,4 Per Inch
|
| Gauge
|
14G~32G.
|
|
|
Performance Features
A. Gear drive uses oil bath bearing. During high speed operation, all roller balls receive full lubrication. In prolonged operation, these roller balls do not get damaged easily. This extends usable machine life. Wire race bearing ball as standard.
B. Central stitch control system: Unlike other brands, our central stitch control system needs only a hexagonal wrench to adjust screws in order to change stitch and weight per yard. This lessens adjustment time. No loosenings even under prolonged use. (This is standard accessory)
C.Interchangeable cam and cam holder even with other machines. Computer-milled cam holder has accurate graduation for numerical adjustments. Setting of cam holder is by single bevel and screw that reduces cam change time, and assures 100% setting accuracy.
D. Cam holder set are of 4 tracks type. this enables owners to have many uses from one machine.
SJA series:4-track cam holder, knit cam (1 row) is standard.
2SJA:4-track cam holder, knit cam (2 row), tuck cam (1 row), welt cam (1 row) is standard.
4SJA:4-track cam holder, knit cam (4 row), tuck cam (2 row),welt cam (2 row) is standard.
2SJA 30"x150F: 2-track cam holder, knit cam (2 row), tuck track (1 row), welt track (1 row ) is standard.
E. Control panel uses push buttons that are structurally excellent, easy to change and durable even on prolonged operation.
4-digit counter and R.P.M. meter are standard.
3-shift counter is standard.
F. Memminger lubricator oiler pulsonic 5.2 is standard.
G. Drive : In order to facilitate test-runs, and changing of cams and needles, The upper leg portion of this machine installed with 2 American type handle bars.
H. Uses 3.7 kw Teco Taiwanese motor.
I. Fuji Japan frequency inverter device is standard.
J. Uses taiwanese 132 steps take down device.
K. Safety net adopts stylish safety net design. (every safety net has a safety switch. for safety, machine immediately stops running when this is opened.)
|
|
|
Standard
Diameter and Fabric Width After Cutting |
| DIA. |
30" |
31" |
32" |
33" |
34" |
36" |
38" |
40" |
| F/W |
74" |
76" |
78" |
79" |
80" |
81" |
82" |
90" |
|
|
Fabric width after cutting indicated in table was tested in 24G with
32/S T/C yarn.
Above table is for reference only. |
|
| Running Speed (Standard) |
| DIA. |
Gauge |
No.
of Feeder |
R.P.M. |
| 30" |
24G |
120F |
34 |
| 31" |
24G |
124F |
32 |
| 32" |
24G |
128F |
31 |
| 33" |
24G |
132F |
30 |
| 34" |
24G |
136F |
28 |
| 36" |
24G |
144F |
26 |
| 38" |
24G |
152F |
24 |
| 40" |
24G |
160F |
23 |
|
A.
Speed indicated in table was tested in 24G with 30/S cotton yarn.
Optimum speed depends on yarn, gauge and needle oil used.
B.
Above table is for reference only.
C.
SINGLE KNITS PRODUCTION FORMULA (LENGTH)
No. of feeders x speed Rev. / Min. x 60 Min.
_________________________________
courses per inch x 36
= production (yard / hr or m/hr)
D.
Remarks:
If courses are computed in inches, then 1yd.=3ft=12x3=36 inches
If courses are computed in centimeters, then 1m=100cm.
For single side stripe computation, yarn feeder number must be divided
by 2, because 2 yarn feeders produce a stripe.
Bobbin Rack Drive Standards
A.
Yarn feeding device:
All models use MEMMINGER POSITIVE STORAGE DEVICE.
B.
Side creel with 100% spare pegs of Fulong Taiwan is standard.
Tuber creel or over head creel are optional.
C.
FUKAHAMA 360^o Radar and cleaning fan center cleaning tuber are
standard.
D.
Touch type needle switch & fabric switch are standard.
Fabric Features
A.
This machine can knit various single jersey fabric from natural and
synthetic fibers such as T-shirt, underwear, sports wear, pants, etc.
B.
Matched with special yarn design, it can knit special fabrics(such
as wool, rabbit hair, acrylic yarn, silk etc.)
C.
It also can knit printed fabric and industrial cloth.
D.
It can knit elastic cloth, underwear, sports wear, ...etc.
Other Features :
Uses Groz-Beckert high speed, high performance needles.
Uses reputed chinese brand needle oil (It gives excellent lubrication and stable
high speed operation in both cold and hot climate areas)
Uses double push sinker pieces and double sinker push cams.
The cylinder is made of high quality swedish or japanese steel, and processed by
computer milling.
|
|
|
