|
Performance Features
A.
Gear drive uses England-made wire race bearings. During high speed
operation, all roller balls receive full lubrication. In prolonged
operation, these roller balls do not get damaged easily. This extends
usable machine life.
B.
Interchangeable cam and cam holder at same size, even with other
machines.Computer-milled cam holder has accurate graduation for numerical
adjustments, Setting of cam holder is by single bevel and screw that
reduces cam change time, and assures 100% setting accuracy.
C.
Adjustment of the stitch adopts the dial central adjusting system,
accurate and convenient.
The RT-8DJ series comes with the knitting design of dial 2 tracks,
cylinder 4 tracks (Six-Lock type), which precision design provides you
with a prompt & easy exchange of knitting.
Cam holder of machine RT-8DJ (SIX LOCK TYPE)as follow:
-
Dial HB cams 1 x 1/2 x 1/4 (HB knit track 1 row x HB welt track 1/2 row
x HB tuck track 1/4 row)
Dial LB cams 1/2 x 1/2 x 1/4 (LB knit track 1/2 row x LB welt track 1/2
row x LB tuck track 1/4 row)
Cylinder cams 2 x 3 x 1 (2 knit-track cam cylinder x 3 welt-track cam
cylinder x 1 tuck-track cam cylinder)
Cam holder of machine RT-8DJA as follow
-
Dial A cams 1/2 x 1/2 x 1/4 (HB A section knit-track 1/2 row x HB A
section welt-track 1/2 row x HB A section tuck-track 1/4 row)
Dial B cams 1/2 x 1/2 x 1/4 (HB B section knit-track 1/2 row x HB B
section welt-track 1/2 row x HB B section tuck-track 1/4 row) -
Dial C cams 1/3 x 2/3 x 1/6 (HL C section knit-track 1/3 row x HL C
section welt-track 2/3 row x HL C section tuck-track 1/6 row)
Dial D cams 1/3 x 2/3 x 1/6 (HL D section knit-track 1/3 row x HL D
section welt-track 2/3 row x HL D section tuck-track 1/6 row)
Cylinder cams 2 x 3 x 1 (knit-track 2 row x welt-track 3 row x
tuck-track 1 row)
D.
Control panels use push-button type that are structurally excellent
and durable.
4-digit production counter is standard.
3-shift production counter and R.P.M. are standard.
E.
Memminger lubricator oiler pulsonic 5.2 is standard.
F.
Drive:
In order to facilitate test-runs, and changing of cams and needles, The
upper leg portion of this machine installed with 2 American type handle
bars. Save labor & save operation time.
G.
Uses 3.7 kw Teco Taiwanese motor.
H.
Fuji Japan frequency inverter device is standard.
I.
Take-down device of 132 steps is standard.
J.
Safety net adopts stylish safety net design. (every safety net has a safety switch for safety, machine immediately
stops running when it is opened. )
|
|
| Machine Speed (Standard) |
|
DIA.
|
Gauge
|
No.
of Feeder
|
R.P.M.
|
|
30"
|
24G
|
84F
|
40
|
|
32"
|
24G
|
90F
|
38
|
|
34"
|
24G
|
96F
|
35
|
|
36"
|
24G
|
100F
|
33
|
|
38"
|
24G
|
106F
|
31
|
|
40"
|
24G
|
112F
|
30
|
|
Speed indicated in table is as per test conducter with TC 30S/1 cotton yarn
and 24G needles. Optimum speed depends upon yarn, gauge number and
needle oil used.
Above table for reference only.
Bobbin Rack Drive Standards
A.
Positive storage device:
All models use Memminger type positive storage device.
B.
Side creel with 100% spare pegs of Fulong Taiwan is standard.
Tuber creel or over head creel are optional.
C.
Taiwan Shengsong brand 360^o Radar cleaning fan and center tuber cleaning device are
standard.
D.
Touch type needle switch is standard.
Fabric Features
A.
Suitable for knitting interlock, panto D1 roma, 1 x 1 rib, 2 x 2
rib interlock eight lock, mila no rib, single pique, ...etc. High
quality fabrics of natural cotton yarns & artificial fiber yarns.
B.
Combined the special yarns (such as lycra yarn, P.P 120/80F x 2
yarn, ...etc.), the RT-8DJ series can knit multi-fold fabric & quality
sports suits.
C.
Also available for knitting printing fabrics & industrial fabrics.
Other Features :
Uses Groz-Beckert high speed, high performance needles.
Uses reputed chinese brand needle oil. It gives excellent lubrication and stable
high speed operation in both cold and hot climate areas.
|
|
